Tool
Which label fits your bottle?
Pick the bottle. Get the typical label size, what it holds, and the one thing to check before you print.
Helpful reference only. This page is for general help only. Label sizes vary by bottle mold and supplier. Always confirm the exact label size with your manufacturer before printing.
150 cc packer bottle
Typical label
2.5 × 6 in
Holds about 90 size 0 or 120 size 1, with a desiccant. Takes a 38 mm lid. If your count runs higher, step up a bottle rather than squeezing the desiccant out.
The bottle is about 6.6 in around, so a 6 in label leaves a clean gap at the seam.
Sizes are written height × around, the way label printers quote them.
Typical for stock bottles. Your manufacturer's bottle may differ; confirm the label size with them before printing.
Request quotes for this 150 cc bottle →Opens the quote request with this bottle, its lid and the label size filled in. You can change any of it.
Label size calculator any round bottle
YOUR LABEL, ESTIMATED (HEIGHT × AROUND)3.85 × 6.35 in
Width is the distance around the bottle (3.1416 × diameter) minus a quarter inch so the ends never overlap; height is the flat panel minus a quarter inch of breathing room. Measure the panel, not the bottle: a label cannot climb the shoulder or the heel.
Estimate only. Confirm with your manufacturer.
Which label fits which bottle typical stock packers
| Bottle | Typical label | Holds about | Lid | |
|---|---|---|---|---|
| 60 cc | 1.75 × 4.25 in | 30 size 1 capsules | 33 mm | |
| 100 cc | 2 × 5 in | 30 size 0 or 60 size 1 | 38 mm | |
| 120 cc | 2 × 5 in | 60 size 0 or 90 size 1 | 38 mm | |
| 150 cc | 2.5 × 6 in | 90 size 0 or 120 size 1 | 38 mm | |
| 175 cc | 2.5 × 6.5 in | 90 size 0 | 38 mm | |
| 200 cc | 2.75 × 7 in | 120 size 0 or 100 size 00 | 38 mm | |
| 225 cc | 2.75 × 7 in | 120 size 00 | 45 mm | |
| 250 cc | 3 × 7 in | 150 size 0 | 45 mm | |
| 300 cc | 3 × 7 in | 180 size 0 or 90 size 00 | 45 mm | |
| 400 cc | 3.25 × 8.5 in | 120 size 00 | 45 mm | |
| 500 cc | 3.25 × 9.5 in | 180 size 00 or 240 size 0 | 45 mm | |
| 750 cc | 4 × 10.5 in | 360 size 0 | 53 mm | |
| 1000 cc | 4.5 × 11.5 in | 500 size 0 | 53 mm |
Capsule counts are for full bottles with a desiccant; softgels and tablets pack differently. Counts follow common packer charts; label sizes follow manufacturer spec sheets.
Powder jars and jugs wide mouth
| Container | Typical label | Holds about | Lid |
|---|---|---|---|
| 8 oz jar | 2.2 × 8 in | about 150 g of powder | 70 mm |
| 16 oz jar | 2.2 × 11.25 in | about 240 g | 89 mm |
| 25 oz jar | 4 × 11.25 in | about 500 g | 89 mm |
| 44 oz jug | 3 × 15 in | about 600 g | 120 mm |
| 55 oz jug | 4 × 15 in | about 700 g | 120 mm |
| 1 gal jug | 5.6 × 13.25 in | 1.5 to 2 kg | 110 to 120 mm |
| 2 gal jug | 6 × 18 in | 2 to 3.5 kg | 120 mm |
Jug labels are often wrap-arounds that stop short of the handle; the width here is the printable panel.
Before you print anything: these are typical sizes for stock bottles. Molds differ by a tenth of an inch between suppliers, which is enough to make a label overlap. Ask your manufacturer for the dieline of the exact bottle they will fill, and proof one label on one bottle first. This page is for general help only. Label sizes vary by bottle mold and supplier. Always confirm the exact label size with your manufacturer before printing.
Spec the bottle once, get quotes that match
The request wizard asks for the container, the count and who prints the labels, so every manufacturer prices the same thing.
Get Free Quotes →